真空上料機Vacuum feeder
◆性能特點 Performance characteristics
設備易裝卸,清洗,可輪流用于多臺設備
The equipment is easy to load, unload and clean, andcan be used for multiple equipment in turn
符合GMP標準,滿足CIP要求
Comply with GMP standards and CIP requirements
無塵操作Dust free operation
設備便于維修,運行費用極低
The equipment is easy to maintain and the operationcost is very low
◆工作原理Working Principle
當壓縮空氣供給真空發生器時,真空發生器就產生負壓形成真空氣流,物料被吸入吸料咀,形成物氣流,經過吸料管到達上料機的料倉內。過濾器把物料與空氣徹底分離,當物料裝滿料倉時,控制器會自動切斷氣源,真空發生器停止工
作。同時料倉門自動開啟,物料落到設備的料斗中。與此同時,壓縮空氣通過脈沖反吹自動清洗過濾器。等時間到或料位傳感器發出上料信號時,自動啟動上料機。
Working principle: when compressed air is supplied to the vacuum generator, the vacuum generator generates negative pressure to form vacuum air flow. The mate-
rial is sucked into the suction nozzle to form mate-rial air flow, which reaches the silo of the feeder through the suction pipe. The filter completely sepa-rates the material from the air. When the material isfilled with the silo, the controller will automati-
cally cut off the air source and the vacuum generatorwill stop working. At the same time, the silo door opens automatically and the materials fall into the hopper of the equipment. At the same time, the com-pressed air automatically cleans the filter through pulse back blowing. When the time is up or the mate-rial level sensor sends the feeding signal, the feed-ing machine will be started automatically.